The International 10-20 system sets scalp electrode positions as fractions of the nasion-to-inion distance. See how that measurement determines the spacing from Fz to Cz, and why a simple percentage calculation helps make midline placement clear and consistent.

Multiple Choice

Using the International 10-20 system, if the nasion-inion distance is 40 cm, what is the distance from Fz to Cz?

In the International 10-20 system, midline electrode positions are defined as specific fractions of the total nasion-to-inion distance. Cz sits at the midpoint of that line, while Fz lies anterior to Cz by a fixed portion of the NI distance. Roughly, the spacing between Fz and Cz corresponds to about 20% of the nasion-inion distance. With a nasion–inion distance of 40 cm, 20% of that is 8 cm, so the distance from Fz to Cz is 8 cm.

Why the Distance from Fz to Cz Matters in Evoked Potentials

Evoked potentials are small electrical signals produced by the nervous system in response to a specific stimulus. A sound, flash of light, or gentle electrical pulse can trigger activity that travels through sensory pathways and reaches the brain. By recording that activity with electrodes on the scalp, clinicians and researchers can study how quickly signals move and how the brain responds.

The signals are tiny, so electrode placement matters. A few centimeters can change the shape or size of a recorded waveform. That’s why EEG work often uses the International 10–20 system: a standard method for placing scalp electrodes based on measured distances between clear landmarks on the head.

One useful example is the distance between Fz and Cz, two electrodes placed along the head’s midline. If the distance from the nasion to the inion is 40 cm, Fz and Cz are 8 cm apart. The calculation is simple once the system’s name makes sense.

The “10–20” system, in plain language

The name refers to the spacing of electrodes along measured paths on the scalp. Adjacent points are placed at intervals equal to either 10% or 20% of the relevant head measurement. The measurements follow the curve of the scalp, rather than a straight line through the air.

The two landmarks along the midline are the nasion, the small indentation between the forehead and nose, and the inion, the bump at the back of the skull. The distance between them is called the nasion–inion distance, often shortened to NI distance.

Once that distance is measured, the midline electrode locations can be set as percentages of the total. In the standard layout, Fz is at 30% of the distance from the nasion, while Cz is at 50%. The gap between them is therefore 20% of the full nasion–inion distance.

With an NI distance of 40 cm:

40 cm × 0.20 = 8 cm

So, Fz is 8 cm from Cz.

It helps to picture the midline as a marked path, like a ruler laid along a curved road. Cz sits at the halfway point, and Fz is a little farther forward. The stretch between them takes up one-fifth of the full nasion-to-inion measurement.

What the electrode names tell us

The letters in electrode labels describe broad regions of the scalp. F stands for frontal, C for central, P for parietal, and O for occipital. The letter z means the electrode is on the midline. So Fz is a frontal midline site, while Cz is a central midline site.

Numbers are used for positions to the left or right of the midline. In the usual naming convention, odd numbers mark the left side and even numbers mark the right. For example, C3 is on the left side of the central region, and C4 is on the right. These labels aren’t coordinates on a flat map; they’re part of a shared system for describing locations on a rounded head.

Standard labels make it easier to compare recordings from different sessions, clinics, or research teams. If one technician places Fz much closer to Cz than another does, their recordings may not be directly comparable. The 10–20 system gives everyone a common starting point.

Why spacing matters for evoked potentials

An evoked potential is usually described by the timing and size of its waveform. A response may have peaks that appear at characteristic times after a stimulus. These features can provide information about how signals travel through a sensory pathway.

But electrodes don’t simply “hear” activity from one small spot beneath them. Each scalp electrode records a mixture of electrical activity from a broader area, shaped by the brain, skull, scalp, electrode reference, and recording setup. Moving an electrode can change the balance of signals it captures.

That’s one reason careful placement is important when recording responses such as visual evoked potentials, which follow a visual stimulus, or auditory evoked potentials, which follow sound. Consistent locations help clinicians and researchers interpret differences in waveforms without wondering whether the electrodes shifted.

A correctly measured 8 cm gap between Fz and Cz doesn’t guarantee a perfect recording by itself. Electrode contact, skin preparation, the reference electrode, equipment settings, and the person’s anatomy all matter too. Still, accurate placement is a basic part of building a reliable measurement.

Measuring the head: follow the curve

A common source of confusion is whether the 40 cm measurement should be treated as a straight line from the front of the head to the back. In the 10–20 system, measurements are taken along the scalp’s surface. That curved path better reflects where the electrodes will sit.

The exact landmarks should be identified before measuring. Small differences in where the nasion or inion is marked can shift the calculated positions, especially when measurements need to be repeated. A flexible tape measure is useful because it follows the head’s contour instead of bridging over it.

The same principle applies to the other measurement paths used in a full electrode layout. The 10–20 system uses several head measurements, including distances across the left-to-right axis. Each provides a framework for placing electrodes at consistent fractions of the measured path.

Although the arithmetic is straightforward, the method is more than “measure once and divide.” The landmarks, scalp curve, and electrode labels all work together. Think of it as drawing a small map on a globe: the map is useful because its reference points are clear.

A quick way to check the calculation

For the midline positions, remember the sequence from front to back:

  • Fpz: 10% from the nasion

  • Fz: 30%

  • Cz: 50%

  • Pz: 70%

  • Oz: 90%

Each neighboring pair in this sequence is separated by 20% of the nasion–inion distance. Fz is at 30% and Cz is at 50%, so the difference is 20 percentage points.

For a 40 cm NI distance, that interval is 8 cm. For a 50 cm distance, it would be 10 cm. The percentage stays the same; the measured distance changes with the person’s head.

That distinction is useful: the 10–20 system doesn’t assign every person the same number of centimeters between electrodes. It scales the spacing to the individual’s measurements. This makes the layout adaptable while preserving consistent relative locations.

A small distance with a useful purpose

The distance from Fz to Cz may seem like a minor detail, but standardized placement supports clearer communication and more dependable comparisons. In evoked-potential recordings, where signals can be subtle, that consistency matters.

With a nasion–inion distance of 40 cm, Fz and Cz are separated by 20% of the measured path. The calculation is 40 × 0.20, which gives 8 cm. Once the landmarks and percentages are clear, the result follows naturally—and so does the broader idea behind the 10–20 system: use each person’s head measurements to place electrodes in a consistent, meaningful pattern.